Controls Products

Below is a list of Controls Products from our manufacturers.  Click on the model number to download the brochures or view the manufacturer information.

Soft Starts

Weg

SSW05 – WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors.

SSW06 – Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 3 to 2500 hp.

SSW07 – Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 6 Hp to 400 Hp.

GPH2 – The Combination Soft Starters is an industrial general purpose AC motor soft starter package and designed for simple and quick installation and start-up.

Combination Soft Starters TPH

Mounted Panel Soft-Starter – ASW06 Series

Medium Voltage Soft-Starter – SSW7000 Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The MV soft-starter WEG is available for power ratings from 750 HP up to 4500 HP. Voltage range: 2.3 kV – 6.9 kV.

Encoders

Encoder Products Company

711-720 – The new E-Cube© version of the Cube Accu-Coder™ increases critical performance specifications for the most popular resolutions. The E-Cube© features advanced Opto ASIC circuitry, 125 kHz frequency response, select CPR to 2500, 3 arc minutes accuracy, 85° C standard operating temperature and optional 100° C operation at 5-24 VDC.

15S – The Model 15S Accu-Coder™ offers a high performance feedback solution in a low profile package, making the Model 15S ideal for commercial and light-duty industrial applications. This industry standard Size 15 (1.5″ diameter) encoder features a precision bearing set, sealing available to IP64, a durable 1/4″ or 6 mm stainless steel shaft, and a selection of servo, flange, and face mount options.

755AModel 755A Size 15 Accu-Coder™ is ideal for applications requiring a small, high precision, high performance encoder. Being approximately 1.5″ in diameter and 1.5″ long it will fit where many encoders cannot. Designed with all metal construction and shielded ball bearings, it will provide years of trouble-free use.

702 – The Model 702 Size 20 Accu-Coder™ is a heavy duty, extremely rugged, reliable, yet compact industry standard 2″ diameter encoder designed for harsh factory and plant floor environments. The double shielded ball bearings are rated at 80 lb maximum axial and radial shaft loading to ensure a long operating life.

725Model 725 Size 25 Accu-Coder™ optical shaft encoder is specifically designed for the challenges of an industrial environment. But don’t let its tough, industrial package fool you; it still has the performance to reach resolutions up to 30,000 cycles per revolution.

758The Model 758 Size 58 Accu-Coder™ is a heavy duty, extremely rugged, reliable, yet compact European standard 58 millimeter diameter encoder designed for harsh factory and plant floor environments.

15T/15H – The Model 15T or 15H offers a high performance feedback solution in a low profile package. This thru-bore(T) or hollow bore(H) encoder will easily mount over shaft sizes up to 0.375″ or 10 mm in diameter. Unlike modular or kit encoders, the Model 15 utilizes an integral bearing set, and an innovative flexible mounting system which is much more tolerant to axial misalignment or radial shaft run-out.

260 – The Model 260 Accu-Coder™’s larger bore (up to 0.625″) and low profile makes it a perfect solution for many machine and motor applications. Available in two distinct formats – a Hollow Bore and a complete Thru-Bore – the Model 260 uses EPC’s innovative anti-backlash mounting system, allowing simple, reliable, and precise encoder attachment.

121 – AT LAST! A reliable modular encoder that requires no calibration, gapping, or special tools to install! EPC has taken the performance of modular encoders to a new level with the Model 121 Auto-Aligning Modular Encoder. This new and innovative design provides simple, reliable, hassle free installation.

225 – The Model 225 Accu-Coder™ is a low cost Thru-Bore encoder available in both single channel (225A) and quadrature (225Q) models.

25T/H – Introducing the next generation of high performance encoders – the Model 25T. As contemporary as its appearance, the Model 25T features the largest thru-bore available in a 2.5” encoder, mounting directly on shafts as large as 1.125″ (28 mm). With resolutions of up to 10,000 CPR, and Frequencies of up to 1MHz this industrial strength encoder is perfect for fast revving motors.

775 – The Model 775 Slim Thru-bore encoder is designed to fit directly either on a motor shaft or other shafts where position, direction, or velocity information is needed. The Model 775 is available in large bore sizes to 1.375″. The Model 775 features a collet type mounting clamp for bore sizes to 1.000 ”and a single-screw clamp type mounting for bore sizes to 1.375 ”.

776 – The Model 776 Large Bore Thru-bore encoder is designed to fit directly either on a motor shaft or other shafts where position, direction, or velocity information is needed. The Model 776 is available in large bore sizes to 1.875″. The Model 776 features a single-screw clamp type mounting. An optional anti-rotation flex mount maintains housing stability.

770 – The Model 770 C-face encoder is a rugged, high resolution encoder designed to mount directly on NEMA C-face motors. Both sides of the encoder are C-face mounts, allowing additional C-face devices to be mounted to this encoder. Unlike many C-face kit type encoders, the Model 770 contains precision bearings and an internal flex mount, virtually eliminating encoder failures and inaccuracies induced by motor shaft runout or axial endplay.

771 – The Model 771 C-Face encoder is a rugged, high resolution, high temperature (100° C) encoder designed to mount directly on NEMA C-face motors. Both sides of the encoder are C-face mounts, allowing additional C-face devices to be mounted to this encoder. Other C-face units are kit type encoders, but the EPC Model 771 contains precision bearings and an internal flex mount thereby eliminating encoder failures and inaccuracies induced by motor shaft runout or axial endplay.

755A (NEMA 23) – Model 755A NEMA Mount Accu-Coder™ with it’s integral shaft coupling, mounts directly on NEMA motors. Designed for easy installation on industrial size 23 and 34 motor frames, it features standard bolt circle patterns, and can accommodate shaft sizes of 0.250″, 0.375″, or 6 mm.

755A (NEMA 34) – Model 755A NEMA Mount Accu-Coder™ with it’s integral shaft coupling, mounts directly on NEMA motors. Designed for easy installation on industrial size 23 and 34 motor frames, it features standard bolt circle patterns, and can accommodate shaft sizes of 0.250″, 0.375″, or 6 mm.

Direct Motor Replacement

Large Motor Kit

Contrex

Speed Sensors/Ring Gears – CONTREX speed sensors can be used to sense the speed or speed and direction of a rotating motor shaft for closed-loop motion control applications.  Sensors are available in several different models including 2X Hall Effect, Quadrature, and Magnetic Pickup.  Though capable of working in nearly any installation, our speed sensors are specifically designed for easy drop-in installation with CONTREX Ring Kits.

Optical Encoders – The Optical Encoders from CONTREX come in an industry standard cube style package that make it easy for direct replacement of other brand encoders.  Available in 600 pulses-per-revolution (PPR) and 1200 PPR, these encoders provide a single pulse-train for sensing motor speed, or quadrature pulse-trains for sensing speed and direction.

CX-Series

M-Series

ML-Series 

Electro-Mechanical Components by Weg

Operators

Weg

Pushbuttons & Pilot Lights – WEG has used its leading-edge technology & development capability to design the CSW series. These user friendly and durable pilot devices are available in Industrial Ø22 and Ø30mm & Hazardous Ø30mm versions.

Terminal Blocks – Designed to guarantee a safe and secure connection for electric conductors. Developed to be used in several applications, offering great quality and performance.

Push Button Pendants 

Conductix Push Button Pendant Stations

Back to Top